Temp cencor on Quattrini M244 Cylinder head

[Svint1]

Hi,

Have anybody fitted a temp sensor (for SIP speedo) on their Quattrini M232/244 cyilinder head?

 

I can't figure out how to fit it on mine...

 

Rgrds

 

[SpeedDemon]

There are 2 ways of doing this.
1. Cut of the ring on your sparkplug and replace it with the ring that came with the set. Then screw your sensor in there and secure it with the nut.
2. Drill a hole in your head with the correct diameter cut thread and screw the sensor in place.
3. Buy/make a water-cooled head and mount it there.

Correct me please if I'm wrong.

Verstuurd uit mijn Subaru GX-I1300 AWD

[Svint1]

Ok, Thanks.

My concern was more about if there is sufficient Space for the temp censor on the head, when fitted to the sparkplug as normal.

 

But I'll do as With "normal" cylinderheads and fit it on the sparkplug.

[SpeedDemon]

When I screwed the sparkplug in, I needed to bend the ring a bit to get the socket wrench in. Then bended it back in place. Maybe you need to open the hole in the cowling so the wire has somewhere to go.

Verstuurd uit mijn Subaru GX-I1300 AWD