External airfilter for Pinasco VXR26 carburettor box

[Svint1]

Hi,

I'm currently building a M244-engine for my SS180.

I'm using a Pinasco VXR26/26 carb With the funnel and was wondering what airfilter to use.

As it is to be fit in a SS180 frame, I'm not using a hose Connected to the frame.

Any suggestions what airfilter to put on the carburettor Box?

Rgrds
Øyvind

[wheelspin]

To use the original hose w/o an additional air filter is the smartest way to solve this issue. That is what I think.

I'm not sure but I guess you'll need an adaptor to connect the SS hose to the p-range carb bowl or you do it the redneck way- just tie it down to the needed diameter. To use one of the original SS metal ties could be an optical "plus"...

[Svint1]

OK, I'm leaning more towards a setup similar to the Polini venturi kit, but just buy a filter, as the Pinasco comes with a funnel...


Sent from my iPhone using Tapatalk

[wheelspin]

Of course you can solve it like this.

But this will offer you the roaring and pesky sound of an open rotary valve engine. And the fact that a displacment Monster like the m244 is will make it worse when it takes it's breath.

If you have two Bad ears or you just don't care- Go for it.

But this is not the Sound that I would like to have with this little cutie.

 

Just my two Cents 

[Svint1]

Hmm, the noise/sound from the engine is ok for a while, but not for long distance riding...

Sounds like the hose is going back on...

Thanks for advice! [emoji1303]


Sent from my iPhone using Tapatalk